Investigación de mercados: minerales, metales y productos químicos

Contactar nos

+7 495 988-1-123
Lunes-viernes 10:00-19:00 (MSK)

Encargar un estudio

Si se necesita el estudio en nuevo tema, por favor, descarga y llena este formulario, y envía la solicitud adjuntando el formulario completo.

Noticias de la empresa

22 March 2024
Company news
On March 19, the general director of the company Igor Petrov presented a report “The import component of the Russian rare metals market.” at the conference “Rare and Rare Earth...
14 February 2024
Articles of our staff
In the journal “Mineral Resources of Russia. Economics and Management" (No. 1, 2024) published an article by the general director of the company Igor Petrov “Flows of raw materials...
10 January 2024
Company news
The company Infomine is connected and uses electronic document management through VLSI EDI (the service is provided by "Tensor Company" LLC).
28 December 2023
RESULTS OF THE COMPANY'S OPERATION IN 2023
In 2023, the INFOMINE Research Group company completed over 80 studies. In general, the market for marketing research of industrial products during the year is characterized by sharp changes in...
22 December 2023
Company news
On December 18, the company’s expert analyst Victoria Vlasova took part in the “Graphite 2023” conference, organized by CREON Conferences, where she presented a report...
Todas las noticias

Aceptamos

Thermoreactive Binder-Based Moldable Materials in Russia: Production, Market and Forecast

Número de páginas: 84 Número de tablas: 28 El número de cifras: 29
Informe Idioma: Russian
Liberado: 26.08.2008
Forma de presentación:

PDF Copy

Pdf, Word (version for copying and editing)

Pdf, Word, Excel - the version with the source data

Pdf, Word, Excel, 2 hard copies (for credit organizations)

Pdf, Word, Excel, 2 hard copies and PowerPoint presentation (for incorporation into investment projects)

 
Precio: 2 500 Euro
This report is currently available in Russian language only. However, we can provide an English version of the report within 3 weeks after receiving a payment.
 
The research is devoted to analysis of Russian market of moldable materials, based on thermoreactive binders.
The report is composed of 6 Sections, 84 pages, including 28 Tables and 29 Figures.
Section 1 presents classification and properties of main moldable (pressing and molding) materials, and requirements, imposed on their quality in the country.
Section 2 describes production of moldable materials from 2001 to 2007, presents pattern of their production by kinds, describes in details activity of enterprises, manufacturing moldable materials, lists the main traders in the products at Russian market.
Section 3 presents detailed analysis of foreign trade operations in moldable materials by kinds, as well as detailed pattern of export and import operations.
Section 4 describes the main end-use of moldable materials – electrical industry. The obtained information allowed to estimate demand on the materials from producers of low-voltage and high-voltage equipment.
In Section 5, based on above-given data, we present analysis of possible development of production of moldable materials up to 2013.
Key information sources of the research were materials of involved enterprises. Added with data of Federal Service of State Statistics (FSSS) and Federal Customs Service (FCS) of Russia they allowed to estimate standing of the sector in Russia as a whole.
LLC "Research Group «InfoMine» hopes that the research will help specialists in evaluation of current standing of market of moldable materials in Russia and making grounded business decisions.
Introduction
 
1. Properties main of moldable materials, based on thermoreactive binders
1.1. Moldable materials, based on polyester resin binder
1.1.1. Premixes
1.1.2. Prepregs
1.2. Moldable materials, based on phenol-formaldehyde binder
1.2.1. Moldable material AG-4
1.2.2. Dosing and granular fiberglass plastics
1.2.3. Phenol materials (phenoplasts)
1.3. Aminoplastics
 
2. Production of moldable materials, based on thermoreactive binders in Russia
2.1. General characteristics of production of moldable materials, based on thermoreactive binders, in Russia
2.2. The main producers of moldable materials in Russia
2.2.1. JSC «Tver’stekloplastic»
2.2.2. LLC «Stupino plant of fiberglass»
2.2.3. JSC «Gambit»
2.2.4. JSC «Zhilevo plastics plant »
2.2.5. JSC «Khimplast»
2.2.6. JSC "Plastics Institute im. C. Petrov"
2.2.7. JSC «Carbolit»
2.2.8. LLC «PO «Tokem»
2.2.9. JSC «Uralkhimplast»
2.2.10. LLC «Superplast»
2.2.11. PJSC "Polynom"
2.3. The main traders in moldable materials, based on thermoreactive binders, in Russia
 
3. Foreign trade operations in moldable materials, based on thermoreactive binders
3.1. Export operations in moldable materials
3.2. Import operations in moldable materials
 
4. Consumption of moldable materials
Estimation of development of electrical industry
 
5. Forecast of production of moldable materials, based on thermoreactive binders
 
Appendix 1. Regional pattern of production of low-voltage electrical equipment in 2003-2006, mln Rubles
Appendix 2. Regional pattern of production of high-voltage electrical equipment in 2003-2006, mln Rubles
Appendix 3. Prices on moldable materials at Russian market (as of March 2008), Ruble/t
Appendix 4. Contact information on the main players of Russian market of moldable materials, based on thermoreactive binders
Table 1. Technical characteristics of polyester moldable materials (GOST 30095-93)
Table 2. Physico-mechanical properties of polyester prepregs
Table 3. Technical characteristics of moldable materials AG-4 (GOST 20437-89)
Table 4. Technical characteristics of dosing and granular fiberglass plastics (GOST 17478-95)
Table 5. Additional quality figures of moldable materials DSV and GSP (GOST 17478-95)
Table 6. Technical characteristics of phenoplasts (GOST 28804-90)
Table 7. Properties of aminoplastics
Table 8. Classification of aminoplastics
Table 9. The main producers of moldable materials (dynamics of 2001-2007), t
Table 10. Physico-mechanical properties of premixes DMC
Table 11. Figures of financial-economic activity of JSC «Tver’stekloplastic» in 2001-2006
Table 12. Physico-mechanical properties of granular fiberglass plastics, manufactured by LLC «SZS»
Table 13. Physico-mechanical properties of polyester resin-based moldable materials, manufactured by LLC «SZS»
Table 14. Figures of financial-economic activity of LLC «SZS» in 2003-2006
Table 15. Properties of aminoplastics, manufactured by JSC "ZhZPM"
Table 16. Properties of silicon plastics (moldable materials of PKO series), manufactured by JSC "ZhZPM"
Table 17. Properties of polyamide moldable material PI-PR-20, manufactured by JSC "Plastics Institute»
Table 18. Designation of phenoplasts, manufactured by LLC «PO «Tokem»
Table 19. Technical characteristics of phenoplast, produced by JSC «Uralkhimplast»
Table 20. Estimation of liquidity of JSC «Uralkhimplast» in 2007
Table 21. The main traders in moldable materials
Table 22. Pattern and dynamics of export of moldable materials by types in 2001-2007, t
Table 23. Dynamics of exports of the main producers of moldable materials in 2001-2007, t
Table 24. Dynamics of export of moldable materials by countries in 2001-2007, t
Table 25. Pattern and dynamics of import of moldable materials (by kinds) in 2001-2007, t
Table 26. Pattern of import of moldable materials by countries in 2001-2007, t
Table 27. The main consumers of imported moldable materials in 2006-2007, t
Table 28. Production of articles from moldable materials in electrical industry in 2003-2006
Figure 1. Dynamics of moldable materials production in Russia in 2001-2007, t, %
Figure 2. Pattern of production of moldable materials in Russia in 2007, t, %
Figure 3. Pattern of production of moldable materials by types in 2001-2007, %
Figure 4. Dynamics of production of phenoplasts and fiberglass plastics in 2001-2007, t, %
Figure 5. Dynamics of production of polyester resin-based moldable materials and aminoplastics in 2001-2007, t, %
Figure 6. Dynamics of production of polyester resin-based moldable materials by JSC «Tver’stekloplastic» in 2001-2007
Figure 7. Dynamics and pattern of moldable materials production by LLC «SZS» in 2001-2007, t, %
Figure 8. Dynamics of production of moldable material AG-4V by JSC «Gambit» in 2001-2007, t, %
Figure 9. Dynamics of production of aminoplastics by JSC "ZhZPM" in 2001-2007, t, %
Figure 10. Dynamics of production of aminoplastics by JSC «Khimplast» in 2001-2007, t
Figure 11. Dynamics of production of phenoplasts by JSC «Carbolit» in 2001-2007, t
Figure 12. Pattern of the supplies of JSC «Carbolit» products
Figure 13. Dynamics of production of moldable materials by LLC «PO «Tokem» in 2001-2007, t, %
Figure 14. Dynamics of phenoplasts production by JSC «Uralkhimplast» in 2001-2007, t, %
Figure 15. Dynamics of export of moldable materials in 2001-2007
Figure 16. Pattern of moldable materials exports by types (2001-2007), %
Figure 17. Shares of export in production of moldable materials by types in 2001-2007, %
Figure 18. Dynamics of import of moldable materials in 2001-2007, t, %
Figure 19. Pattern of import of moldable materials by kinds in 2007, %
Figure 20. Dynamics of supplies of fiberglass plastic AG-4 by enterprises of Ukraine in 2001-2007, t
Figure 21. Dynamics of supplies of fiberglass plastics DSV and GSP by enterprises of Ukraine in 2001-2007, t
Figure 22. Average annual prices on imported phenolic moldable materials of Ukrainian producers, $ thousand/t
Figure 23. Dynamics of apparent consumption of moldable materials, based on thermoreactive binders, in Russia in 2001-2007, t
Figure 24. Pattern and dynamics of consumption of moldable materials by kinds of the products in 2001-2007
Figure 25. Pattern and dynamics of provision of domestic market with moldable materials of domestic production in 2001-2007, %
Figure 26. Dynamics of production of low- and high-voltage electrical equipment in 2003-2006, mln Rubles
Figure 27. Forecast of production of polyether moldable materials in 2008-2013, t
Figure 28. Forecast of production of phenolic moldable materials in 2008-2013, t
Figure 29. Forecast of production of phenoplasts in 2008-2013, t
 

Salen pronto

April 2024

Phenol in the Russia, EAEU countries and the world: Production, Market and Forecast (4 edition)

April 2024

Activated Carbon in Russia, EAEU and the world: Production, Market and Forecast (12 edition)

April 2024

Talc in Russia, the EAEU and the world: Production, Market and Forecast (6 edition)

April 2024

Garnet Sand in Russia and the world: Production, Market and Forecast (3 edition)

Agentes de venta de los informes ya preparados

Яндекс.Метрика

Pevcheskiy per., 4, bld.4, 4th floor, Moscow, 109028, Russia

Teléfono: +7 (495) 988-1-123

E-mail: info@infomine-rg.com